AUTOMATIC TRANSFER SWITCH
TSM & TST SERIES
Our Automatic Transfer Switches incorpores the INTELLIGENT CONTROL OF TENSION TRANSFERENCE (CITT) – that brings together in one only device;
QUALITY, RELIABILITY, GREAT PERFORMANCE FEATURES and EXCELLENT PRICES.
Quality, from the design up to the smallest component that shapes it.
Reliability on having had been conceived considering the most strict regulations of safety. Powered by the most advanced technology in microprocessors of last generation.
Price, which only a company with optimized management can offer.
TSM - 100 V2
TRANSFER SWITCH 100A
The Automatic Transfer Switch TSM-100 is the CITT applied to a single-phase supply system.
As indicated in the electric schematic, with the presence both supplies, the TSM-100 V2 keeps connected the electric company supply, if a failure is detected, the TSM-100 will switch on the electrogenerator and commuting the voltage supply when the electrogenerator is stabilized.
When the supply of the net comes back, the TSM-100 V2 commutes again and returns to its initial state.
The CITT V2 supervises continuously the voltage of the net, analyzing any failure or instability in it, if unsatisfactory readings are obtained the CITT V2 initiates the electrogenerator and commutes the voltage of the net by the one that provides the electrogenerator, once stabilized. When the net voltage returns to the normality the CITT V2 exchanges again to the net and switches off the electrogenerator after a prearranged and programmable time.
TSM-100 V2 Automatic Transfer Switch 100A / 120/240V / NEMA 3R
SPECIFICATIONS:
Detections
Net supply
- Sampling: 100%
- Low voltage : 60% or 80% (Selectionable with SW2-1)
- Frequency deviation: ± 4Hz. (Selectionable with SW2-3)
Electrogenerator supply
- Sampling: 100%
- Low voltage: 60% or 80% (Selectionable with SW2-1)
- Frequency deviation: ± 4Hz. (Selectionable with SW2-3)
Timings
- T1 - 1 - 10" sec Electrogenerator startup delay
- T2 - 1 - 10” sec Delay in connection of the charge to the electrogenerator
- T3 - 1 - 5’ Min Delay in connection of the charge to the net supply.
- T4 - 1 - 5’ Min Electrogenerator shutdown delay.
TSM - 200 V3
TRANSFER SWITCH 250A SINGLE PHASE
The ATS TSM-200 V3 is the new CITT V3 version applied to a mono-phase supply system.
As indicated in the electric schematic, with the presence both supplies, the TSM-200 V3 keeps connected the electric company supply, if a failure is detected, the TSM-200 will switch on the electrogenerator and commuting the voltage supply when the electrogenerator is stabilized.
When the supply of the net comes back, the TSM-200 V3 commutes again and returns to its initial state.
The new CITT V3 supervises continuously the voltage of the net, analyzing any failure or instability in it, if unsatisfactory readings are obtained the CITT initiates the electrogenerator and commutes the voltage of the net by the one that provides the electrogenerator, once stabilized. When the net voltage returns to the normality the CITT exchanges again to the net and switches off the electrogenerator after a prearranged and programmable time.
TSM-200 V3 Automatic Transfer Switch 250A / 120/240V / NEMA 3R
TST - 250 V3
TRANSFER SWITCH 250A tHREE-PHASE
The ATS TST-250 V3 is the new CITT V3 version applied to a three-phase supply system.
As indicated in the electric schematic, with the presence both supplies, the TST-250 V3 keeps connected the electric company supply, if a failure is detected, the TST-250 V3 will switch on the electrogenerator and commuting the voltage supply when the electrogenerator is stabilized.
When the supply of the net comes back, the TST-250 V3 commutes again and returns to its initial state.
The new CITT V3 supervises continuously the voltage of the net, analyzing any failure or instability in it, if unsatisfactory readings are obtained the CITT initiates the electrogenerator and commutes the voltage of the net by the one that provides the electrogenerator, once stabilized. When the net voltage returns to the normality the CITT exchanges again to the net and switches off the electrogenerator after a prearranged and programmable time.
TST-250 V3 Automatic Transfer Switch 250A / 120/240V / 3-4 POLES / NEMA 3R
TST - 630 V3
TRANSFER SWITCH 630A tHREE-PHASE
The ATS TST-630 V3 is the new CITT V3 version applied to a three-phase supply system.
As indicated in the electric schematic, with the presence both supplies, the TST-630 V3 keeps connected the electric company supply, if a failure is detected, the TST-630 V3 will switch on the electrogenerator and commuting the voltage supply when the electrogenerator is stabilized.
When the supply of the net comes back, the TST-630 V3 commutes again and returns to its initial state.
The new CITT V3 supervises continuously the voltage of the net, analyzing any failure or instability in it, if unsatisfactory readings are obtained the CITT initiates the electrogenerator and commutes the voltage of the net by the one that provides the electrogenerator, once stabilized. When the net voltage returns to the normality the CITT exchanges again to the net and switches off the electrogenerator after a prearranged and programmable time.
TST-630 V3 Automatic Transfer Switch 630A / 120/240V / 3-4 POLES / NEMA 3R
SPECIFICATIONS:
Detections
Net supply
- Sampling: 100%
- Low voltage : 60% or 80%
- Frequency deviation: ± 4Hz.
Electrogenerator supply
- Sampling: 100%
- Low voltage: 60% or 80%
- Frequency deviation: ± 4Hz.
Timings
- T1 - 1 - 10" sec Electrogenerator startup delay
- T2 - 1 - 10" sec Delay in connection of the charge to the electrogenerator
- T3 - 1 - 5’ min Delay in connection of the charge to the net supply.
- T4 - 1 - 5’min Electrogenerator shutdown delay.
Weight: 31kg (68.34lb)
Dimensions: 600 x 500 x 200 (23.6 x 19.7 x 7.9 inches)
TSM - 50B
TRANSFER SWITCH 50A
This small and compact Transfer Switch TSM-50B 120/240V 50Amp is designed for small portable generators without autostart.
In this case we will use the automatic start module (AUTO-MOD)
TSM-50B mantains the system connected to electrical companie subminister, only in case of failure the TSM-50B will startup the electrogenerator transfering, once stabilized, the tension to the electrogenerator.
Once the subminister is restored (net supply), the TSM-50B return to initial status.
Transfer Swich TSM-50 50A / 120/240V / NEMA 3R
SPECIFICATIONS:
Environmental specifications
· Operating temperature: -4ºF(-20ºC) a 149ºF(65ºC).
· Storage temperature: -22ºF(-30ºC) a 167ºF(75ºC).
· Relative humidity 95%, without condensation.
· Maximum operational altitude: 4500mts.
Approbals
· CE certificate (240Vac 50/60Hz)
· Certification ISO 9001
Detections
Net supply
. Lack of tension
· By voltage drop below 170V
Timings
· At the moment that generator gives tension the transference will done.
Weight: 10kg (22lb)
Dimensions: 300 x 200 x 145cm (12 x 7.8 x 5.7 inches)
- Brochure TSM 50B Spanish
- Brochure TSM 50B English
- Instrucciones TSM 50 Español
- Instructions TSM 50B English
TL CONTROLS. All Rights Reserved, 2023